CV example

Mechanical Engineer CV Example (Arabic + English) with ATS Tips 2026 | MyCV

This is a Mechanical Engineer CV example written for the Saudi job market, where openings cluster around Eastern Province industrial facilities and mechanical systems contractors. What separates a strong mechanical CV is specificity: 'maintenance' is a broad word, while 'rotating equipment maintenance with vibration analysis' is a specialty. This example shows how to connect your work to availability, downtime, and cost saved. Adapt the details to your sector: industrial, HVAC, or oil and gas.

Bandar Al-Mutairi

Mechanical Engineer

[email protected]

+966 55 123 4567

الدمام, Saudi Arabia

Professional Summary

Mechanical Engineer with 7 years operating and maintaining rotating equipment and HVAC systems at industrial facilities in the Eastern Province, and a registered member of the Saudi Council of Engineers. I raised equipment availability to 97% through a preventive maintenance programme and vibration analysis, and cut unplanned downtime by 42%. Experienced with pumps, compressors, and heat exchangers, and with writing technical specifications and evaluating vendor bids. I am looking for a role that combines engineering reliability with energy-efficiency improvement.

Experience

Senior Mechanical Engineer (Reliability and Maintenance)

an industrial facility in the Eastern Province

Jan 2022 - Presentالدمام, Saudi Arabia

Ran the preventive maintenance programme for 180+ rotating assets, lifting availability from 89% to 97% in 18 months. Introduced vibration analysis and predictive maintenance, cutting unplanned downtime by 42% and saving roughly SAR 2.3M a year. Led an annual turnaround on a production unit in 21 days instead of 28, without exceeding the approved budget. Wrote technical specifications for four centrifugal pumps and evaluated nine vendor bids, achieving 18% savings at full specification compliance. Performed root cause analysis on repeat failures in two air compressors and ended the recurrence by revising lubrication and inspection scheduling.

Mechanical Engineer

a mechanical systems contractor

Feb 2019 - Dec 2021الدمام, Saudi Arabia

Supervised installation and testing of HVAC systems for a 45,000 sqm commercial building. Prepared heat load calculations and equipment selection, delivering testing and balancing (TAB) with no consultant observations. Reviewed shop drawings in AutoCAD and resolved clashes with electrical and civil works, cutting rework by 30%. Followed preliminary and final handover and prepared the operation and maintenance manuals for the client.

Graduate Mechanical Engineer

a building materials plant

Aug 2017 - Jan 2019الدمام, Saudi Arabia

Monitored production lines and logged daily equipment performance indicators. Designed replacement mechanical parts in SolidWorks, reducing reliance on imported components in three applications. Participated in failure investigations and produced weekly maintenance reports.

Education

Bachelor of Science in Mechanical Engineering

King Fahd University of Petroleum & Minerals (KFUPM) · GPA 4.1 / 5.0

Sep 2013 - Jun 2017الدمام, Saudi Arabia

Certifications

Saudi Council of Engineers Membership (Professional Engineer)

Saudi Council of Engineers (SCE)

ID SCE 245901

Certified Vibration Analyst Category II

Mobius Institute

Expires May 2028

Certified Energy Manager (CEM)

Association of Energy Engineers (AEE)

Skills

Rotating equipment (pumps, compressors, turbines)Preventive and predictive maintenanceVibration analysisRoot cause failure analysis (RCA)HVAC systemsHeat exchangers and pipingSolidWorks and AutoCADCMMS maintenance management systemsTechnical specifications and vendor evaluationTurnaround and shutdown managementEnergy efficiencyIndustrial facility safety

Languages

Arabic (Native)English (Professional Working Proficiency)

Example CV · Mechanical Engineer

What recruiters look for

A valid Saudi Council of Engineers number, a legal requirement to practice that is checked before the experience is read.
A clear specialty inside mechanical engineering: rotating equipment, HVAC, design, or reliability, since each is a different market.
Reliability numbers: availability, downtime, and maintenance cost, which is the daily language of a maintenance manager.
Industrial facility experience or major-project standards, which is what the Eastern Province asks for most.
Technical English, because specifications, operating manuals, and failure reports are all in English.

Key skills & ATS keywords

Mechanical EngineerSaudi Council of Engineers (SCE)Rotating EquipmentPreventive MaintenanceVibration AnalysisHVACSolidWorksAutoCADCMMSRoot Cause Analysis (RCA)Turnaround / ShutdownEnergy Efficiency

Common mistakes to avoid

Writing 'equipment maintenance' without naming the equipment, since pumps, HVAC, and production lines are different jobs and the reader cannot tell what you are good at.
Omitting the SCE membership number, the first filter applied to engineering applicants.
Listing engineering software without a single project or part you actually designed with it.
Giving no figure for availability, downtime, or cost, when those numbers exist in every maintenance department.
Sending an image-based file or a multi-column design, which reaches the ATS garbled or empty.

How to write your summary

Write your summary in three or four lines in this order: title, years of experience, your specialty inside mechanical engineering, facility type, then your strongest reliability number. Example: 'Mechanical Engineer with 7 years on rotating equipment at industrial facilities, SCE registered, raised availability from 89% to 97% and cut unplanned downtime by 42%.' The specialty in the first line is what keeps your CV out of the generic 'engineer' pile.

Related guides

Build yours in minutes

Start from this example — free, no watermark, English or Arabic.